-
- 4mm, 5mm, and 6mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
-
- Includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm hex wrenches
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
-
- Includes 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm hex wrenches
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
-
- 3, 4, and 5 mm hexes + T25 Torx® bit
- Combo screwdriver with keyring holder, all in a tough composite case
- 2.25 in. (57 mm) long
-
- 2mm, 2.5mm, and 3mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
-
- The AWS-7 combines 4mm and 5mm hexes with a T25 Torx®-style wrench.
- Great for derailleur pinch bolts, brake pads, disc brake rotor bolts, and more.
- Wrenches are made from industrial quality high torque steel.
-
- 4mm, 5mm, and 6mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Ball end tips to access hard-to-reach areas
-
- The Fold-Up Hex Wrench Set combines 4, 5, and 6mm hexes, a flat blade screwdriver, and a T25 Torx compatible driver
- The multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles
-
- The BBT-9 is used to remove and install external bearing crankset bottom brackets
- Fits cups and lockrings with 16 external notches and an outside diameter of approximately 44mm
-
The CC-3.2 is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement
-
- This cutter is designed for cutting brake and SIS cables or housings
- It has a built-in crimper for cable end caps and a forming hole for reforming housing and housing ferrules
-
- A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM® AXS™ 12 speed, as well as 1/8” and 3/16” chains
- The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets
- Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP)
- The CT-3.3 will install, but not peen, Campagnolo® 11 and 12-speed chain rivets
-
- 12 splines, 23.5mm diameter
- Fits Shimano, SRAM, SunRace, Chris King
- Also fits some Shimano disc brake lockrings
-
- The popular FR-5 lockring tool with guide pin pressed into the tool providing stability and preventing the tool from slipping out
- Works on Shimano and other cassette lockrings
-
- Use as a self-contained grease gun with an included canister or screw the pump on to any tube of Park Tool grease
- Small tip opening ensures precise placement of lube in any application
-
- L-shaped, high-torque industrial steel hex wrenches with a ball end on the long arm and stubby short arms
- Specifically designed for reaching bolt heads in tight spaces
- Includes a handy portable tool organizer/holder
- Sizes: 1.5, 2, 2.5, 3, 4, 5 and 6mm hexes
-
- Features Park's unique I-Beam handle
- Includes : 3, 4, 5, 6, and 8mm hex wrenches and a straight blade screwdriver
-
1.5, 2, 3, 4, 5, 6, and 8mm hex wrenches: a T25 Torx wrench: straight blade screwdriver
-
1.5, 2, 2.5, 3, 4, 5, 6 and 8mm hex wrenches, T25, Philips and flat blade screwdrivers, a composite wrapped tire lever, two spoke wrench sizes (SW-0, black, for 3.23mm nipples and SW-2, red, for 3.45mm nipples) and a 12-speed compatible chain tool
-
- Specifically designed for unlocking dirty/rusty master links
-
- High quality, uncomplicated, effective and easy to use
- 3, 4, 5, 6, 8mm Hex wrenches
- Flat blade screwdriver
- 8, 9, 10mm socket wrenches
-
- Forged aluminum side plates
- 3, 4, 5 and 8mm hex wrenches
- T25 Torx® compatible driver
- Combo cross/straight tip screwdriver
- Key ring holder
- 76 grams
-
- Forged aluminum side plates
- 3, 4, 5, and 8mm hex wrenches
- T25 Torx® compatible driver
- Combo cross/straight tip screwdriver
- CO2 adapter
- Keyring holder
- 95 grams
-
- Forged aluminum side plates
- 2.5, 3, 4, 5, 6 and 8mm hex wrenches
- T25 and T30 Torx® compatible drive
- 8mm and 15mm box wrenches
- Combo cross/straight tip screwdriver
- Key ring holder
- 153 grams
-
- Forged aluminum side plates
- 2.5, 3, 4, 5, 6, and 8mm hex wrenches
- T25 and T30 Torx® compatible driver
- Combo cross/straight tip screwdriver
- CO2 cartridge inflator adapter
- Chain tool
- Keyring holder
- 243 grams
-
- A super strong, composite, multi-position handle
- Hardened and plated tools and smooth ergonomic operation
- Lightweight, compact, and perfect to carry along
- 3, 4, 5, and 8mm hex wrenches
- T25 Torx® compatible driver
- Combo cross/straight tip screwdriver
- Keyring holder
- Weight: 60g (2.12 ounces)
-
- A super strong, composite, multi-position handle
- Hardened and plated tools and smooth ergonomic operation
- Lightweight, compact, and perfect to carry along
- 3, 4, 5, and 8mm hex wrenches
- T25 Torx® compatible driver
- Combo cross/straight tip screwdriver
- CO2 cartridge inflator adaptor
- Keyring holder
- Weight: 74g (2.61 ounces)
-
- A super strong, composite, multi-position handle
- Hardened and plated tools and smooth ergonomic operation
- Lightweight, compact, and perfect to carry along
- 3, 4, 5, 6, and 8mm hex wrenches
- T25 & T30 Torx® compatible driver
- Combo cross/straight tip screwdriver
- Keyring holder
- Weight: 94g (3.32 ounces)
-
- A super strong, composite, multi-position handle
- Hardened and plated tools and smooth ergonomic operation
- Lightweight, compact, and perfect to carry along
- 2.5, 3, 4, 5, 6, and 8mm hex wrenches
- T25 & T30 Torx® compatible drivers
- Combo cross/straight tip screwdriver
- 8 & 15mm box wrenches
- Key ring holder
- Weight: 131g (4.62 ounces)
